Company Profile
Press-centre
Services
Cooperation
Supply
Products
Subscribe
Dealers
New products
Basket
Basket is empty  
 
Поиск
Front-End Wheel Loader PK-65
Authorization
ChTZ-Uraltrac / Production / Wheel loaders / Front-End Wheel Loader PK-65 / Operating characteristic

Description Operating characteristic Completeness
Count: 

Engine

Model YaMZ-238M2-21
Manufacturer "Avtodiesel" JSC
Type V-shaped
Number of cylinders 8
Operating power, kWt /hp 176 (240)
Crankshaft nominal speed, rpm 2100
Torque, max, Nm at 1250…1450 rpm 667
Displacement, l 14,86
Air cleaner Two-stage: I - cyclone;
II - paper filter elements
Mains voltage, V 24
Generator, kWt 1,4

Transmission

Type hydromechanical, both axles are driven
Axle ratio 20,38
Pumps drive reducer three-flow with damping clutch

Speed of movement, km/h:

Loader model Gear
Forward Reverse
I II III IV I II III
PK65 7,25 11,97 23,9 37,8 7,64 12,6 25,3

Running gear

Driving axles non-steerable with 4x4 drive
Front axle suspension rigide
Rear axle suspension hinge, swinging ± 12°
Bevel-gear differential with four pinions. Semi-axles are unloaded, spline connection with the hub
Tires size, inches wide, 23,5-25,0
Pressure in tires, MPa (kgs/cm2) 0,3±0,025 (3,0±0,25)

Designation of the front and rear axles

Model Axle Designation Manufacturer
PK-65 Front ZF MT-L3105 Germany
Rear ZF MT-L3097

Controls

Cabin with integrated ROPS-FOPS, with back pressure, sealed
Service brakes hydraulic
Parking brakes mechanical
Attached implements control is proportional, with hydraulic servo-drive. Turning is provided by hydraulic cylinders of the articulated frame
Max folding angle, min, degrees ±37°

Operator working seat

Cabin with integrated ROPS-FOPS, with back pressure, sealed
Sound pressure level inside the cab, dB (A), max 78
Outer sound pressure level according to GOST, max 85

Hydraulic system

Pump:
- - pump capacity, max, l/min 177
- pressure, max, MPa 17,7
Hydraulic cylinders, diameter, mm:
- of boom lifting 100
- of bucket dumping 125
Total time of the cycle, max, sec 10

Usage of capacity

Table of the materials density
Ground Density, t/m Filling, %
Earth (dry) 1,115 100
Clay 1,5...1,7 100...110
Sand (damp) 1,89 110
Sand (dry) 1,55 100
Gravel dry 1,65 85
Asphalt 1,6 100
Coal broken anthracite 1,046 100
Nitrogen fertilizer 1,25 85
Rock 1,6...2,0 75...100

Overall dimensions

Overall dimensions Front-End Wheel Loader PK-65

1 Hinge height, max, mm 4308
2 Angle of bucket throwing-back at maximum height, degree 58°
3 Unloading height at 45°, not less, mm 3142
4 Bucket overhang when unloading at 45°, mm 1242
5 Angle of bucket throwing-back when transporting, degree 52°
6 Deepening depth, max, mm 150
7 Clearance, mm 420
8 Wheel base, mm 3280
9 Overall length, mm 8287
10 Height with cab, mm 3465 3440
11 Bucket width, mm 3000
12 Turning radius: with bucket, mm 6700
13 Angle of semi-frame folding, degree 37°
14 Track, mm 2160
  Bucket capacity, rated, cubic meters 3.6
  Breakout force, kgf 16500
  Tilting load at longitudinal position, 0 degrees 15000
  Tilting load at semi-frame folding, 40 degrees 13300
  Operating weight, kg 19000
На предыдущую страницу Наверх
Rambler's Top100