"Chelyabinsk Tractor Plant - Uraltrac" Ltd
Russia, 454007, Chelyabinsk, Lenin avenue, 3, e-mail: email@example.com
International trade office: +7 351 772-95-82, e-mail: firstname.lastname@example.org
ChTZ-Uraltrac / Service / Plant of engineering machines
It offers the services on the major repair of the tractors Т-130, Т-170 and Т-10.
Furthermore, it offers the following services by the customer order:
The tractor major repair is carried out during from 10 to 30 working days beginning from the deadline day.
The services are paid after reconciliation of price list and tractor repair list.
All products must be tested for their conformity with the approved technical conditions, working standards and norms.
The established warranty period of the overhauled machines is 1 year or 1000 service hours.
It offers the services on the thermal treatment of the parts, forgings and castings on the efficient domestic and foreign equipment.
The shop single in Ural equipped with the multi-purpose chamber furnaces "Degussa" (Germany) allows performing the most complex chemical-and-thermal treatment of the machine parts and stamps together with the nonoxidation heating and minimal hardness fluctuation.
The following operations can be carried out in the shop: cementation with the controlled carbonic potential, annealing, hardening and tempering of the parts made of the structural and tool steels; water and oil quenching of the forgings and castings; high-frequency current hardening of the shafts, pinion axles, levers, and others.
The dimensions of the treated parts are up to 700х1200х600 mm. The maximum weight is up to 800 kg.
Such equipment as the tube generators and the thyristors designed to perform the high-frequency current hardening allows carry out the pinion rim hardening along the edge.
The dimensions of the treated parts are the following: diameter is up to 700 m, the length is up to 1400 mm.
The equipment for the shotpeening allows increasing durability of the pinions and shafts for 5-6 times.
The dimensions of the treated parts are the following: the diameter is up to 600 mm, the length is up to 300 mm.
It offers the services on production of the wire products (bolts, nuts, screw, pins, unions) of the various diameters and lengths with the own or customer's material.
It offers the services on zincing, oxidation, copper coating of the various parts with the preliminary chemical treatment or sand-blasting.
The dimensions of the treated parts are up to 600х1000 mm.
It offers the services on cutting of the straight-tooth pinions with the diameter up to 500 mm with the module from 9 to 13 and degree of accuracy 14 - 11.
It offers the services on alteration of the hub T-130 to this one T170 (end tooth cutting).
The detailed information can be obtained in the commercial department of the Plant of Engineering Machines by telephone +7(351) 779-84-10.